Make these DIY Christmas ornaments to adorn your tree this holiday season. Easy and quick to make, they're easily customizable and serve as a fun craft for the whole family.
What You'll Need
Materials
- Balloon
- Ball of cotton string (Quality Park 10-Ply String Ball, 475")
- Craft glue
- Clothespin
- Dowel
- Glitter (Martha Stewart Fine Glitter)
- Pin
- Tweezers
- Metallic thread
- Spray mount (3M Spray Mount Artist's Adhesive)
- Evergreen branch
Instructions
-
Blow up the balloon until it's slightly smaller than your fist. Tie the end of the cotton string to the end of the balloon.
-
Thin the glue slightly with water and brush some on the bottom of the balloon to tack down the string. Begin wrapping the string vertically around the balloon. When 3/4 of the balloon is covered vertically, begin wrapping the string horizontally. To change direction, wrap the string around the tied-off end of the balloon. Continue until 3/4 of the balloon is wrapped horizontally.
-
Cut the string and secure it with a dab of glue. Brush the watered-down craft glue all over the string-covered balloon. Pinch the top of the balloon with a clothespin and thread the clothespin onto a dowel that you've suspended between two points. Allow it to dry for several hours.
-
Once dry, pop the balloon with a pin and remove it—using tweezers if necessary. Add a loop of metallic thread and brush the balloon with glue again. Working over a bowl, spoon on the glitter and set aside to dry.
-
Spray the branch with spray mount and spoon on the glitter. Allow to dry. Affix the ornament to the branch.